i-POWER 6000 delivers the highest power at 2 ohm of any amplifier in the market. Its also a highly reliable advanced digital power amplifier, specially designed for low impedance load.  Reproduces very tight sound with outstanding clarity at two ohm load, and thanks to its technology, is very  unlikely to overheat.

  Specially designed for 2ohms load

  High power to weight ratio

  High damping factor even when clipping

  Very stable output at any load
  Short circuit-able speaker outputs
  High quality connectors Neutrik
  Two level limiter build-in

Sensitivity for full rated power

1.4 Volts RMS or 0.775 Volts

Frequency Response 20 Hz to 20 KHz

1dB   at any power level

Signal to Noise ratio 20 Hz to 20 KHz

More than 103 dB

Total Harmonic Distortion (THD)

0.1%

Intermodulation Distortion (IMD)

0.05%

Damping Factor

600 From 20 Hz to 400 Hz.  (at 2 ohms load)

Load Impedance

Safe with all types of loads

Output power stereo mode at  8 ohm      (stereo)

1000 + 1000 Watts RMS    (both channels driven)

Output power stereo mode at  4 ohm      (stereo)

2000 + 2000 Watts RMS    (both channels driven)

Output power stereo mode at  2.66 ohm  (stereo)

3000 + 3000 Watts RMS    (both channels driven)

Output power stereo mode at  2 ohm      (stereo)

3600 + 3600 Watts RMS    (both channels driven)

Output power bridged mode at 16 ohm   (mono)

2000 Watts RMS

Output power bridged mode at 8 ohm     (mono)

4000 Watts RMS

Output power bridged mode at 4 ohm     (mono)

7200 Watts RMS

Overload and short-circuit protection system

Current limited controlled by ACC at 65A per CH.

Overheat protection system

Cut-off  at internal 85 Deg.   Resume at 50 Deg.

Power Supply protection

Soft start - Against all severe voltage fluctuations

AC Input Voltage without affecting max. Output Power

200 V - 250 Volts AC.   (when loading 2 ohms)

AC Input Voltage at moderate power operation

140 V - 250 Volts AC.   (when loading 2 ohms)

Dimensions W x D x H

480 x 438 x 88 mm  (2U.  19" Rack mount )

Weight 

12.9 Kg.