D-TECH 2400i is a high achieving digital amplifier capable of delivering  high power in a very small size. The amplifier can reproduce sound with outstanding clarity and stability, setting a new standard of features while maintaining a high level of simplicity. It is one of the most versatile, easy to use amplifiers on the market. 

  High power in a 1.5U chassis

  High damping factor even when clipping

  Very stable output at any load
  Short circuit-able speaker outputs
  Top-of-range Neutrik connectors
  Customizable limiter settings

  Very high AC voltage tolerance range

Sensitivity for full rated power

1.4 Volts RMS or 0.775 Volts

Frequency Response 20 Hz to 20 KHz

1dB   at any power level

Signal to Noise ratio 20 Hz to 20 KHz

More than 103 dB

Total Harmonic Distortion (THD)

0.1%

Intermodulation Distortion (IMD)

0.05%

Damping Factor

800 From 20 Hz to 400 Hz.

Load Impedance

Safe with all types of loads

Output power stereo mode at  8 ohm      (stereo)

600 + 600 Watts RMS   (both channels driven)

Output power stereo mode at  4 ohm      (stereo)

1200 + 1200 Watts RMS   (both channels driven)

Output power stereo mode at  2.66 ohm  (stereo)

1600 + 1600 Watts RMS   (both channels driven)

Output power stereo mode at  2 ohm      (stereo)

1400 + 1400 Watts RMS   (MODE LZ)

Output power bridged mode at 16 ohm   (mono)

1200 Watts RMS

Output power bridged mode at 8 ohm     (mono)

2400 Watts RMS

Output power bridged mode at 4 ohm     (mono)

2800 Watts RMS    (MODE LZ)

Overload and short-circuit protection system

Current limited controlled by AGC at 35A per CH.

Overheat protection system

Cut-off  at internal 85 Deg.   Resume at 55 Deg.

Power Supply protection

Soft start - Against all severe voltage fluctuations

AC Input Voltage without affecting max. Output Power

180 V - 250 Volts AC.   (when loading 4 ohms)

AC Input Voltage at moderate power operation

140 V - 250 Volts AC.   (when loading 4 ohms)

Dimensions W x D x H

480 x 385 x 66 mm  (1.5U.  19" Rack mount )

Weight 

9.5Kg.